Next PRP for obtaining platelet-rich plasma

Next PRP is a platelet-rich plasma acquisition system based on the use of a single syringe that can also be converted into a tube, a cap, and a connector, making it a smart, fast, efficient, and flexible PRP preparation solution. Manufactured and designed to meet the highest requirements of medical professionals.

Certificates
This kit has CE certification for Class IIb medical product, according to Directive 93/42/EEC Annex IX and the MEDDEV guide for the application of classification rules for medical devices MEDDEV 2.4/1 Rev 9.

Advantages over other PRP acquisition systems
• Quick: PRP acquisition in just 4 minutes.
• Possibility of acquisition without the need for anticoagulant.
• There is no need to activate the PRP as the body acts as an activator.
• Flexibility: 3 different protocols to choose from depending on the treatment.
• Ease of use: the extraction syringe itself becomes a tube for centrifugation.
• Greater security: the manipulation of blood and PRP and the need to use additional utensils such as needles or tubes is minimized, which reduces the risk of contamination.

Contents
• 1 10ml Next PRP syringe
• 1 Luer cap unit
• 1 Luer connector unit

Sterilized by ethylene oxide.

Protocols
With this kit, the medical professional can choose the most suitable protocol for obtaining platelet-rich plasma, with or without anticoagulant. 3 different protocols have been developed to use with this device: the protocol without anticoagulant prevents physiological coagulation by physical repression and is prepared in 4 minutes, and the two protocols with anticoagulant are prepared in 4 and 8 minutes respectively, resulting in two different types of PRP according to the treatment to be performed.

	Protocol without anticoagulant	Protocol with anticoagulant (4min)	Protocol with anticoagulant (8min)
Speed (G)	1500	830	830
Time	4	4	8
Type	PRP poor in leukocytes	PRP poor in leukocytes	PRP rich in leukocytes
Final volume	4-5 ml	4-5 ml	2 ml
Enrichment	2X	2X	4-5X
Steps	3	4	5
Activator requirement	No	Yes	Yes
Video sample	Protocol 1	Protocol 2	Protocol 3

Procedure
1- Phlebotomy
Connect a hypodermic needle or butterfly to the NEXT PRP syringe and perform the blood extraction until a total of 10 ml is obtained.
In the case of using anticoagulant, load 1 ml of anticoagulant into the syringe before the blood extraction (it is advisable to perform this step under laminar flow conditions to avoid environmental exposure of the product and possible contaminations).
2- Centrifugation preparation
Discard the used needle or butterfly and cap the syringe connector with the supplied cap. Unscrew the plunger to convert the syringe into the tube to be used during centrifugation. (In the protocols with anticoagulant, invert the syringe to mix it with the obtained blood)
3- Centrifugation
Place the syringe in the centrifuge with the cone upwards and apply the required speed and time according to the chosen protocol. In the case of using only one syringe, you will need another as a counterweight.
4- Transfer of PRP
Remove the syringe from the centrifuge carefully not to mix the phases, fix the connector in the cone and the plunger. Connect the syringe to another Luer-lock type syringe and transfer 4ml of plasma from one syringe to another.
(In the case of wanting to obtain PRP rich in leukocytes, recover only the last 2ml and a minimal amount of red blood cells and gently shake).
5- Injection
Place the desired needle, the PRP is ready to be injected.

Conservation and storage
• Do not expose to direct sunlight.
• Store in a cool, dry place. Store at temperatures between 5°C and 30°C.
• Do not use if the blister pack is damaged or open.
• The shelf life of the product is 5 years from its manufacture.

* The PRP technique should only be applied by medical professionals.