This product is available exclusively to healthcare professionals.
To continue, please confirm that you meet this requirement by clicking the button below.
Secure payment
Description
Next PRP is a platelet-rich plasma procurement system based on the use of a single syringe that can also be converted into a tube, a cap, and a connector, making it a smart, fast, efficient, and flexible solution for PRP preparation. Manufactured and designed to meet the highest requirements of medical professionals.
Certificates
This kit has a CE certificate for class IIb medical product, in accordance with directive 93/42/EEC Annex IX and the MEDDEV guide for the application of classification rules for medical devices MEDDEV 2.4/1 Rev 9.
Advantages over other PRP procurement systems
• Fast: PRP procurement in just 4 minutes.
• Possibility of procurement without the need for anticoagulant.
• No need to activate the PRP as the body acts as an activator.
• Flexibility: 3 different protocols to choose from depending on the treatment.
• Ease of use: the extraction syringe itself becomes a tube for centrifugation.
• Greater safety: blood and PRP handling is minimized, and the need for additional utensils such as needles or tubes is reduced, which reduces the risk of contamination.
Contents
• 1 10ml Next PRP syringe
• 1 Luer cap unit
• 1 Luer connector unit
Sterilized by ethylene oxide.
Protocols
With this kit, the medical professional can choose the most suitable protocol for obtaining platelet-rich plasma, with or without anticoagulant. Three different protocols have been developed for use with this device: the anticoagulant-free protocol prevents physiological coagulation by physical repression and is prepared in 4 minutes, and the two protocols with anticoagulant are prepared in 4 and 8 minutes respectively, resulting in two different types of PRP depending on the treatment to be performed.
Procedure
1- Phlebotomy
Connect a hypodermic needle or butterfly to the NEXT PRP syringe and draw blood until a total of 10 ml is obtained.
If using anticoagulant, load 1 ml of anticoagulant into the syringe prior to blood extraction (it is recommended to perform thisstep under laminar flow conditions to avoid environmental exposure of the product and possible contamination).
2- Centrifugation preparation
Discard the needle or butterfly used and cap the syringe connector with the supplied cap. Unscrew the plunger to convert the syringe into the tube to be used during centrifugation. (In protocols with anticoagulant, invert the syringe to mix it with the obtained blood)
3- Centrifugation
Place the syringe in the centrifuge with the cone facing up and apply the required speed and time according to the chosen protocol. If using only one syringe, another one will be needed as a counterweight.
4- PRP transfer
Remove the syringe from the centrifuge carefully not to mix the phases, fix the connector in the cone and the plunger. Connect the syringe to another Luer-lock type syringe and transfer 4ml of plasma from one syringe to another.
(If you want to obtain PRP rich in leukocytes, only recover the last 2ml and a minimal amount of red cells and gently shake).
5- Injection
Attach the desired needle, the PRP is ready to be injected.
Conservation and storage
• Do not expose to direct sunlight.
• Store in a cool and dry place. Store at temperatures between 5°C and 30°C.
• Do not use if the blister pack is damaged or open.
• The shelf life of the product is 5 years from its manufacturing date.
Box of 60 units.
* The PRP technique should only be applied by medical professionals.
Certificates
This kit has a CE certificate for class IIb medical product, in accordance with directive 93/42/EEC Annex IX and the MEDDEV guide for the application of classification rules for medical devices MEDDEV 2.4/1 Rev 9.
Advantages over other PRP procurement systems
• Fast: PRP procurement in just 4 minutes.
• Possibility of procurement without the need for anticoagulant.
• No need to activate the PRP as the body acts as an activator.
• Flexibility: 3 different protocols to choose from depending on the treatment.
• Ease of use: the extraction syringe itself becomes a tube for centrifugation.
• Greater safety: blood and PRP handling is minimized, and the need for additional utensils such as needles or tubes is reduced, which reduces the risk of contamination.
Contents
• 1 10ml Next PRP syringe
• 1 Luer cap unit
• 1 Luer connector unit
Sterilized by ethylene oxide.
Protocols
With this kit, the medical professional can choose the most suitable protocol for obtaining platelet-rich plasma, with or without anticoagulant. Three different protocols have been developed for use with this device: the anticoagulant-free protocol prevents physiological coagulation by physical repression and is prepared in 4 minutes, and the two protocols with anticoagulant are prepared in 4 and 8 minutes respectively, resulting in two different types of PRP depending on the treatment to be performed.
| Protocol without anticoagulant |
Protocol with anticoagulant (4min) |
Protocol with anticoagulant (8min) |
||||||
| Speed (G) | 1500 | 830 | 830 | |||||
| Time | 4 | 4 | 8 | |||||
| Type | PRP poor in leukocytes | PRP poor in leukocytes | PRP rich in leukocytes | |||||
| Final volume | 4-5 ml | 4-5 ml | 2 ml | |||||
| Enrichment | 2X | 2X | 4-5X | |||||
| Steps | 3 | 4 | 5 | |||||
| Activator requirement | No | Yes | Yes | |||||
| Video demonstration | Protocol 1 | Protocol 2 | Protocol 3 |
1- Phlebotomy
Connect a hypodermic needle or butterfly to the NEXT PRP syringe and draw blood until a total of 10 ml is obtained.
If using anticoagulant, load 1 ml of anticoagulant into the syringe prior to blood extraction (it is recommended to perform thisstep under laminar flow conditions to avoid environmental exposure of the product and possible contamination).
2- Centrifugation preparation
Discard the needle or butterfly used and cap the syringe connector with the supplied cap. Unscrew the plunger to convert the syringe into the tube to be used during centrifugation. (In protocols with anticoagulant, invert the syringe to mix it with the obtained blood)
3- Centrifugation
Place the syringe in the centrifuge with the cone facing up and apply the required speed and time according to the chosen protocol. If using only one syringe, another one will be needed as a counterweight.
4- PRP transfer
Remove the syringe from the centrifuge carefully not to mix the phases, fix the connector in the cone and the plunger. Connect the syringe to another Luer-lock type syringe and transfer 4ml of plasma from one syringe to another.
(If you want to obtain PRP rich in leukocytes, only recover the last 2ml and a minimal amount of red cells and gently shake).
5- Injection
Attach the desired needle, the PRP is ready to be injected.
Conservation and storage
• Do not expose to direct sunlight.
• Store in a cool and dry place. Store at temperatures between 5°C and 30°C.
• Do not use if the blister pack is damaged or open.
• The shelf life of the product is 5 years from its manufacturing date.
Box of 60 units.
* The PRP technique should only be applied by medical professionals.
