Reference. 10803846
Wall-mounted emergency shower, with thermostatic valve
Wall-mounted emergency shower with thermostatic mixing valve, galvanized steel pipes and stainless steel head, painted with high-quality yellow powder paint.
Personal advice
Description
Wall-mounted emergency shower with thermostatic mixing valve, galvanized steel pipes and stainless steel head, painted with high-quality yellow powder paint. Specially designed for areas where staff are at risk of eye or physical damage from fire, reactants, petroleum products, radioactive materials, acids...
Product Details:
- The thermostatic mixing valve provides warm water, by mixing cold and hot water until it reaches a preset temperature. Warm water encourages the injured person to stay much longer under the water jet that irrigates the emergency device, making it much easier to reach the goal of 15 minutes of immersion required by ANSI/ISEA Z358.1-1998 safety regulations.
- This immediately decontaminates when the water flows when manually activated through the triangular rigid handle.
- Water inlet designed to receive a minimum water flow of 76 L/min at a pressure of 2.4 bars, so it allows spraying the user's entire body in a much shorter time than the usual average.
- Equipped with a universal emergency sign and an inspection control label.
Components and materials:
- 1 shower head made of stainless steel, painted with high-quality yellow powder paint, and provides a minimum flow of 76 L/min between 2.4 bars of pressure.
- 1 thermostatic valve that provides a flow of 90L/min of warm water, by mixing cold and hot water until it reaches a preset temperature, the recommended one is 20-30 °C. It contains two temperature sensors to always provide water at a safe and accurate temperature. The desired temperature is adjusted with the temperature knob, which can be locked. The valve comes factory-set to the maximum and can only be modified by authorized personnel.
- Galvanized steel pipes.
Technical specifications:
- Dimensions: 200 x 610 x 725 mm.
- Water flow: 76 L/min.
- Water inlet pressure: 2.4-6.5 bars.
- Water inlet: 1" female thread.
- Net weight: 8 kg.
Regulations and certifications:
- ISO 9001/13485 certified.
- Complies with quality policies.
- Manufactured according to ANSI Z358.1-2009, EN15154-1 and EN15154-2:2006 standards.
*The shower must have a water flow of 76 liters per minute at 2.4 bars to work properly. For this reason, it is very important that the dimensions of the water inlet pipe are correctly dimensioned taking into account this data.
*Place the emergency equipment sign next to the shower where it is clearly visible.
Product Details:
- The thermostatic mixing valve provides warm water, by mixing cold and hot water until it reaches a preset temperature. Warm water encourages the injured person to stay much longer under the water jet that irrigates the emergency device, making it much easier to reach the goal of 15 minutes of immersion required by ANSI/ISEA Z358.1-1998 safety regulations.
- This immediately decontaminates when the water flows when manually activated through the triangular rigid handle.
- Water inlet designed to receive a minimum water flow of 76 L/min at a pressure of 2.4 bars, so it allows spraying the user's entire body in a much shorter time than the usual average.
- Equipped with a universal emergency sign and an inspection control label.
Components and materials:
- 1 shower head made of stainless steel, painted with high-quality yellow powder paint, and provides a minimum flow of 76 L/min between 2.4 bars of pressure.
- 1 thermostatic valve that provides a flow of 90L/min of warm water, by mixing cold and hot water until it reaches a preset temperature, the recommended one is 20-30 °C. It contains two temperature sensors to always provide water at a safe and accurate temperature. The desired temperature is adjusted with the temperature knob, which can be locked. The valve comes factory-set to the maximum and can only be modified by authorized personnel.
- Galvanized steel pipes.
Technical specifications:
- Dimensions: 200 x 610 x 725 mm.
- Water flow: 76 L/min.
- Water inlet pressure: 2.4-6.5 bars.
- Water inlet: 1" female thread.
- Net weight: 8 kg.
Regulations and certifications:
- ISO 9001/13485 certified.
- Complies with quality policies.
- Manufactured according to ANSI Z358.1-2009, EN15154-1 and EN15154-2:2006 standards.
*The shower must have a water flow of 76 liters per minute at 2.4 bars to work properly. For this reason, it is very important that the dimensions of the water inlet pipe are correctly dimensioned taking into account this data.
*Place the emergency equipment sign next to the shower where it is clearly visible.
Alternative products
Portable emergency eyewash station
985,00€(1.191,85€ VAT INCLUDED)
Emergency eyewash / facewash station, with ABS collector
1.075,00€(1.300,75€ VAT INCLUDED)
Wall-mounted emergency shower, with ABS head.
670,00€(810,70€ VAT INCLUDED)
Wall-mounted emergency shower with valve
464,00€(561,44€ VAT INCLUDED)
Emergency eyewash station, with stainless steel collector
690,00€(834,90€ VAT INCLUDED)
Combined emergency station (shower + eyewash)
2.870,00€(3.472,70€ VAT INCLUDED)
