Hydraulic stretcher with 3 sections 70x184cm, with negative backrest and armrests. Various colors.

Hydraulic stretcher-armchair for physiotherapy and rehabilitation made with exceptionally high-quality materials that ensure maximum patient comfort and, at the same time, provide a multitude of functionalities for the healthcare professional to facilitate their work routines. It includes foldable flat armrests and allows its height to be adjusted by hydraulic action, in addition to being able to adjust the inclination of both the backrest and the leg rest in order to adapt the placement of the stretcher according to the needs of the procedure.

This stretcher is not only a practical and functional solution for your consultation, but also ensures an elegant finish that adapts to all types of interiors thanks to the multitude of available upholstery colors.

General features:
- Reclining backrest both positively, up to 85º, and negatively, down to -15º, by means of a gas piston. In addition, it has been designed with a facial hole and includes the corresponding plug to cover the hole when necessary. 
- The leg rest can also be adjusted in positive and negative inclination, being able to recline it from -50º to 10º by means of a gas piston.
- Ergonomic, reinforced, and highly resistant structure made of exclusive quality steel tube. 
- Designed with 4 double wheels of 50 mm in diameter that can be retracted by a pedal.
- Upholstery made of high-quality leatherette.

Upholstery features:
- Fireproof material (see in the attached image the regulations on fireproof materials it complies with).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High abrasion resistance.
- Resistance to sweat and human saliva.
- Resistant to urine, blood, and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain-resistant surface.
- It also complies with the UNE EN/71-3 (Toy Safety) standard.

Upholstery cleaning instructions:
Any stain, spill, or dirt should be cleaned immediately from the upholstery to avoid the possibility of a permanent stain. A mixture of liquid soap (neutral pH) and water or the compatible cleaners specified in the attached image should be used. Any excess of the mixture should be completely removed with a clean, damp white cloth and the surface dried. Lacquers, strong cleaners, detergents, cleaning solutions containing xylene, ketones (MEK), or acetates, cause immediate damage and contribute to the deterioration of the material.

If you want more complete cleaning instructions, please contact us. 

Technical specifications: 
- Backrest length: 70 cm.
- Seat length: 62 cm.
- Leg rest length: 52 cm.
- Total length: 184 cm.
- Width: 70 cm.
- Foam thickness: 5 cm. 
- Foam density: 30 k/m³.
- Adjustable height: 50 to 90 cm.
- Positive backrest inclination angle: 85º.
- Negative backrest inclination angle: -15º.
- Positive leg rest inclination angle: 10º.
- Negative leg rest inclination angle: -50º.
- Structure material: steel tube coated with epoxy powder, baked in an oven at 210ºC.
- Structure color: white.
- Maximum load: 180 kg.
- 3-year warranty.
- Made in Spain.

Foam options:
If you wish, you can purchase your stretcher with another type of foam (at an additional cost).
- 3 cm 30Kg/m³+ 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³

Transport:
Material delivery is at street level. It is not the carrier's obligation to enter the merchandise inside the client's facilities.

*If you wish to purchase the stretcher with different features in terms of upholstery, foam, structure finish, and height, please contact us.