Hydraulic podiatry chair with 3 sections measuring 62x184cm, with a negative backrest. Various colors.

3-section hydraulic stretcher-armchair that, thanks to its exclusive quality manufacturing materials, guarantees maximum patient comfort during the development of a wide range of treatments, especially in the field of podiatry. It is possible to adjust its height by hydraulic operation and, in addition, it allows adjusting the positive and negative inclination of both the backrest and the independent leg rests in order to enable a multitude of positions.

The upholstery is available in a wide range of colors to adapt to all types of interiors. 

General features:
- It has four double wheels of 50 mm in diameter that can be comfortably retracted by means of a pedal. This allows for easy and practical transport in the office. 
- By lever, it is possible to regulate the inclination of the leg rests both positively, up to 10º, and negatively, up to -50º.
- The backrest is adjustable in inclination by means of a gas piston from 85º to -15º. 
- It was developed with a reinforced steel structure capable of supporting up to 180 kg of maximum load.
- The upholstery is made of unique quality faux leather for greater durability.
- The backrest has been designed with an easy hole to facilitate the placement of the patient in prone position. In addition, a facial plug is provided to hide the hole when necessary.

Upholstery features:
- Fireproof material (consult in the attached image the regulations on fireproof materials that it meets).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to perspiration and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain resistant surface.
- Complies with UNE EN/71-3 standard (Toy safety).

Upholstery cleaning instructions:
- Any stain, spill or dirt should be cleaned quickly from the upholstery to avoid permanent staining.
- Mild soapy solutions or special vinyl fabric cleaning products should be used to remove stains from the material surface. Consult the compatible cleaning solutions specified in the attached image.
- It is recommended to clean only with damp white cloths.
- Lacquers, strong cleaners, detergents, xylene-based liquids, acetone and MEK cause immediate damage and contribute to the deterioration of the material. 

If you want more complete cleaning instructions, please contact us. 

Technical specifications: 
- Backrest length: 70 cm.
- Seat length: 62 cm.
- Leg rest length: 52 cm.
- Total length: 184 cm.
- Width: 62 cm. 
- Foam thickness: 5 cm. 
- Foam density: 30 k/m³.
- Adjustable height: 50 to 90 cm.
- Positive backrest inclination angle: 85º.
- Negative backrest inclination angle: -15º.
- Positive leg rest inclination angle: 10º.
- Negative leg rest inclination angle: -50º.
- Structure material: epoxy powder coated steel tube, oven baked at 210ºC.
- Structure color: white.
- Maximum load: 180 kg. 
- Made in Spain.
- 3 years warranty.

Foam options:
If you wish, you can purchase your stretcher with another type of foam (at an additional cost).
- 3 cm 30Kg/m³+ 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³

Transport:
The delivery of the material is at street level. It is not the carrier's obligation to bring the merchandise inside the customer's facilities.

*If you wish to purchase the stretcher with different characteristics in terms of upholstery, foam, structure finish and height, please contact us.