Reference. 1250CH2135AR7XX
3-section hydraulic stretcher, reinforced structure and retractable wheels. Various colors and sizes.
Hydraulic stretcher with 3 sections, reinforced structure and retractable wheels. Various colors and sizes.
Description
3-section multidisciplinary hydraulic stretcher developed with a reinforced structure and retractable wheels to facilitate its mobility. It is possible to adjust its height by hydraulic actuation, in addition to being able to adjust the inclination, both positive and negative, of the backrest and the leg rest according to the requirements of the treatment.
Backrest with facial hole
The backrest has been designed with a facial hole to improve patient placement. In addition, it has the corresponding facial plug to hide the hole when the treatment needs require it.
Reinforced structure
It is made with a reinforced structure of epoxy powder coated steel tube for greater resistance and stability. Thanks to its manufacturing material, it is capable of supporting a maximum load of up to 180 kg.
Various functionalities
Allows adjusting the height between 50 and 90 cm by hydraulic actuation to adjust the position that best suits each treatment. In addition, through a gas piston, it is possible to regulate the inclination of both the leg rest and the backrest.
Easy and practical transfer in consultation
It has been developed with four double wheels of 50 mm in diameter that can be retracted by a single pedal when they are no longer needed.
Upholstery Features:
- Fire-retardant material (see the regulations on fire-retardant materials in the attached image).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to sweat and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain resistant surface.
- Also complies with UNE EN/71-3 standard (Toy Safety).
Upholstery cleaning instructions:
Any stain, spill or dirt must be immediately cleaned from the upholstery to prevent the possibility of a permanent stain. A mixture of liquid soap (neutral pH) and water or the compatible cleaners specified in the attached image should be used. The excess of the mixture should be completely removed with a clean, white, damp cloth and the surface dried. Lacquers, strong cleaners, detergents, cleaning solutions containing xylene, ketones (MEK) or acetates, cause immediate damage and contribute to the deterioration of the material.
If you want more complete cleaning instructions, please contact us.
Technical specifications:
- Backrest length: 70 cm.
- Seat length: 62 cm.
- Leg rest length: 52 cm.
- Total length: 184 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 50 to 90 cm.
- Positive backrest inclination angle: 85°.
- Negative backrest inclination angle: -15°.
- Positive leg rest inclination angle: 10°.
- Negative leg rest inclination angle: -50°.
- Structure material: epoxy powder coated steel tube, oven baked at 210°C.
- Structure color: white.
- Maximum load: 180 kg.
- Made in Spain.
- 3 years warranty.
Stretcher width to choose:
- 62 cm
- 70 cm
Transport:
The delivery of the material is at street level. It is not the carrier's obligation to bring the goods inside the customer's premises.
*If you want to purchase the stretcher with different features in terms of upholstery, foam, structure finish and height, please contact us.
Backrest with facial hole
The backrest has been designed with a facial hole to improve patient placement. In addition, it has the corresponding facial plug to hide the hole when the treatment needs require it.
Reinforced structure
It is made with a reinforced structure of epoxy powder coated steel tube for greater resistance and stability. Thanks to its manufacturing material, it is capable of supporting a maximum load of up to 180 kg.
Various functionalities
Allows adjusting the height between 50 and 90 cm by hydraulic actuation to adjust the position that best suits each treatment. In addition, through a gas piston, it is possible to regulate the inclination of both the leg rest and the backrest.
Easy and practical transfer in consultation
It has been developed with four double wheels of 50 mm in diameter that can be retracted by a single pedal when they are no longer needed.
Upholstery Features:
- Fire-retardant material (see the regulations on fire-retardant materials in the attached image).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to sweat and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain resistant surface.
- Also complies with UNE EN/71-3 standard (Toy Safety).
Upholstery cleaning instructions:
Any stain, spill or dirt must be immediately cleaned from the upholstery to prevent the possibility of a permanent stain. A mixture of liquid soap (neutral pH) and water or the compatible cleaners specified in the attached image should be used. The excess of the mixture should be completely removed with a clean, white, damp cloth and the surface dried. Lacquers, strong cleaners, detergents, cleaning solutions containing xylene, ketones (MEK) or acetates, cause immediate damage and contribute to the deterioration of the material.
If you want more complete cleaning instructions, please contact us.
Technical specifications:
- Backrest length: 70 cm.
- Seat length: 62 cm.
- Leg rest length: 52 cm.
- Total length: 184 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 50 to 90 cm.
- Positive backrest inclination angle: 85°.
- Negative backrest inclination angle: -15°.
- Positive leg rest inclination angle: 10°.
- Negative leg rest inclination angle: -50°.
- Structure material: epoxy powder coated steel tube, oven baked at 210°C.
- Structure color: white.
- Maximum load: 180 kg.
- Made in Spain.
- 3 years warranty.
Stretcher width to choose:
- 62 cm
- 70 cm
Transport:
The delivery of the material is at street level. It is not the carrier's obligation to bring the goods inside the customer's premises.
*If you want to purchase the stretcher with different features in terms of upholstery, foam, structure finish and height, please contact us.
Alternative products
3-section hydraulic stretcher, reinforced structure and retractable...
1.355,53€(1.640,19€ VAT INCLUDED)
Hydraulic stretcher with 3 sections 70x184cm, with negative backrest...
1.489,24€(1.801,98€ VAT INCLUDED)
Hydraulic podiatry chair-bed with 3 sections 70x184cm, with negative...
1.511,64€(1.829,08€ VAT INCLUDED)
Hydraulic podiatry chair with 3 sections measuring 62x184cm, with a...
1.444,45€(1.747,78€ VAT INCLUDED)
3-section hydraulic stretcher 62x184cm, with negative backrest and...
1.422,06€(1.720,69€ VAT INCLUDED)