Reference. 4047QEUSOB_24V
Emergency battery for QEUSOB_24V surgical lamps
Emergency supply unit for ceiling surgical lamps compatible with Pentaled 63N, Pentaled 81, Pentaled 30E, Pentaled 30N, and U29.
Personal advice
Description
The 24V QEUSOB emergency power unit allows for automatic switching of the power source to battery, ensuring that the lamp and its controls remain operational for a specific time to continue with interventions in case of unintentional power cut or fall of the main power supply system.
Technical Specifications:
- Voltage: 12 V.
- Capacity 12 AH.
- Maximum charging current: 3A.
- Weight: 3.75 g.
- Dimensions: 151 x 98 x 94 (mm).
- Operation range: -20ºC / 40º.
Autonomy:
- Pentaled 63N: 1.5 h.
- Pentaled 81: 1.5 h.
- Pentaled 30E: 4 h.
- Pentaled 30N: 4 h.
- U29: 4 h.
- If the battery is fully discharged, the theoretical number of life cycles is 250.
- If the battery is discharged by 50% and then recharged, the theoretical number of life cycles is 550.
- If the battery is discharged by 30% and then recharged, the theoretical number of life cycles is 1200.
Recommendations:
- Perform a charge/discharge cycle of the battery once a month:
· Charge the battery for at least 6 hours.
· Leave the device on until the battery runs out.
· If the battery's operating time mentioned in "Autonomy" is not reached, you should replace it.
- To ensure good battery performance, replace it at least every 3 years.
First power on:
The battery is shipped already charged and with its relative fuse (F3) disconnected and separately.
You will need to connect the battery using the faston and placing the fuse.
Before connecting to the power system, make sure all fuses have been inserted.
Once powered on, check that the system operates correctly in relation to the charge and discharge cycle.
Recharge cycle:
The battery recharge cycle is indicated by color LEDs:
- Red: battery charging.
- Yellow: battery charged between 80% and 95%.
- Green: battery fully charged.
The LED light stays on when the battery is charging.
If the power line is interrupted, the light goes off.
Technical Specifications:
- Voltage: 12 V.
- Capacity 12 AH.
- Maximum charging current: 3A.
- Weight: 3.75 g.
- Dimensions: 151 x 98 x 94 (mm).
- Operation range: -20ºC / 40º.
Autonomy:
- Pentaled 63N: 1.5 h.
- Pentaled 81: 1.5 h.
- Pentaled 30E: 4 h.
- Pentaled 30N: 4 h.
- U29: 4 h.
- If the battery is fully discharged, the theoretical number of life cycles is 250.
- If the battery is discharged by 50% and then recharged, the theoretical number of life cycles is 550.
- If the battery is discharged by 30% and then recharged, the theoretical number of life cycles is 1200.
Recommendations:
- Perform a charge/discharge cycle of the battery once a month:
· Charge the battery for at least 6 hours.
· Leave the device on until the battery runs out.
· If the battery's operating time mentioned in "Autonomy" is not reached, you should replace it.
- To ensure good battery performance, replace it at least every 3 years.
First power on:
The battery is shipped already charged and with its relative fuse (F3) disconnected and separately.
You will need to connect the battery using the faston and placing the fuse.
Before connecting to the power system, make sure all fuses have been inserted.
Once powered on, check that the system operates correctly in relation to the charge and discharge cycle.
Recharge cycle:
The battery recharge cycle is indicated by color LEDs:
- Red: battery charging.
- Yellow: battery charged between 80% and 95%.
- Green: battery fully charged.
The LED light stays on when the battery is charging.
If the power line is interrupted, the light goes off.
Alternative products
Emergency battery for QE12-28SOB surgical lamps of 24V
1.030,00€(1.246,30€ VAT INCLUDED)
Emergency battery for QEU860SOB surgical lamps of 24V
1.340,00€(1.621,40€ VAT INCLUDED)
