Stainless steel tray 440x320x64 mm

AISI 304 stainless steel with a minimum thickness of 0.6 mm.

Without a lid.

Autoclavable 121 º C

Size: 440 x 320 x 64 mm h

The product must be thoroughly cleaned with hot water for the first time and after each use, disinfected, possibly rinsed with distilled water, and dried with extreme care, it must also be sterilized before subsequent use. The product can be cleaned in ultrasound tanks provided for this purpose and disinfected in instrument washing machines up to a temperature of 95°C (203°F). After cleaning it, and before sterilization, it is recommended to treat the instruments with physiologically safe oil, especially with regard to the tips, connectors, terminals and all moving parts. Be very careful that the product does not come into contact with acids or other aggressive disinfectants that could corrode it. The recommended sterilization method is steam in an autoclave, the cycle temperature should not exceed 135°C (275°F) for a maximum of 15 minutes, to avoid damaging the product. For hot air sterilization, a temperature between 180°C and 200°C is advised. The products can also be disinfected in instrument washing machines up to a temperature of 121°C. Instruments that show signs of corrosion must be immediately discarded. During the warranty period, all defective parts due to well-proven manufacturing causes will be repaired and/or replaced free of charge, excluding labor, travel, transportation, packaging, etc. costs. Damages caused by improper use of the product are not covered by the warranty.