Mayo Tray flat 432x295x19 mm

Mayo Flat Tray

AISI 304 Stainless Steel   with a minimum thickness of 0.6 mm.

Autoclavable at 121 º C

Size: 432x295x19 mm

The product must be thoroughly cleaned with hot water for the first time and after each use, disinfected, possibly rinsed with distilled water, and dried with extreme care. It also needs to be sterilized before subsequent use. The product can be cleaned in designated ultrasonic baths and disinfected in instrument washing machines up to a temperature of 95°C (203°F). After cleaning, and before sterilization, it is recommended to treat the instruments with physiologically safe oil, especially concerning the tips, connectors, terminals, and all moving parts. Take care that the product does not come into contact with acids or other aggressive disinfectants that could corrode it. The recommended sterilization method is steam in an autoclave, the cycle temperature should not exceed 135°C (275°F) for a maximum of 15 minutes to avoid damaging the product. For hot air sterilization, a temperature between 180 and 200°C is advised. The products can also be disinfected in instrument washing machines up to a temperature of 121°C. Instruments showing signs of corrosion must be immediately discarded. During the warranty period, repair and/or free replacement of all defective parts due to well-proven manufacturing causes will be carried out, excluding labor costs, travel, transportation costs, packaging, etc. Damages caused by improper use of the product are not covered by the warranty.