Electric stretcher 4 bodies, 62x185cm, scissor structure and double armrests. Various colors

4-section table for physiotherapy and rehabilitation, adjustable in height from 50 to 90 cm by means of an electric motor that is easily operated by the incorporated hand control. It is developed with a scissor-type structure that guarantees elevation without lateral displacement for better space management. It allows adjusting the inclination of the backrest both positively, up to 45º, and negatively, up to -50º, depending on the type of treatment being performed.

It includes armrests at the backrest height, which can be adjusted in height and moved laterally, and has another pair of armrests at the seat height, in this case with a foldable design.

General features:
- It has 4 double wheels of 50 mm diameter that facilitate its mobility and transfer in consultation. They can be retracted by means of a manual operation pedal.
- The backrest inclination can be adjusted by gas piston.
- The structure is made of steel tube coated with epoxy powder that provides stability, resistance, and durability, being able to support up to 180 kg of weight. 
- The backrest has been developed with a facial plug to improve the patient's position. It also incorporates the corresponding facial plug to cover the hole when necessary. 
- It has a roll holder.
- Made in Spain.
- 3 years warranty.

Upholstery features:
- Fireproof material (consult in the attached image the regulation on fireproof materials that it complies with).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to perspiration and human saliva.
- Resistant to urine, blood, and UV light.
- Waterproof.
- Resistant to sunflower oils.
- Stain-resistant surface.
- It also complies with UNE EN/71-3 standard (Toy Safety).

Foam options:
If desired, you can purchase your table with another type of foam (at an additional cost).
- 3 cm 30Kg/m³+ 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³

Upholstery cleaning instructions:
Any stain, spill, or dirt should be cleaned immediately from the upholstery to prevent the possibility of a permanent stain. A mixture of liquid soap (pH neutral) and water or the compatible cleaners specified in the attached image should be used. The excess mixture should be completely removed with a white, clean, and damp cloth and the surface dried. Lacquers, strong cleaners, detergents, cleaning solutions containing xylene, ketones (MEK) or acetates, cause immediate damage and contribute to the deterioration of the material.

If you need more complete cleaning instructions, please contact us. 

Technical specifications:
- Backrest length: 50 cm.
- Seat length: 135 cm.
- Total length: 185 cm.
- Total width: 62 cm.
- Armrest length: 43.5 cm.
- Armrest width: 8.5 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 50 to 90 cm.
- Positive backrest inclination angle: 45º.
- Negative backrest inclination angle: -50º.
- Structure material: epoxy powder-coated steel tube, baked at 210ºC.
- Structure color: white.
- Maximum load: 180 kg.

Available in 70 cm wide: Ref. 1250CE0140ABR70X

Transport:
The delivery of the material is at street level. It is not the carrier's obligation to enter the goods inside the customer's facilities.

*If you wish to purchase the table with different features in terms of upholstery, foam, structure finish, and height, please contact us.