Electric stretcher 2 bodies, 70x190cm, scissor structure and backrest reclining in the negative. Various colors and sizes.

A 2-section table for physiotherapy and rehabilitation, adjustable in height from 50 to 90 cm by an electric motor that is easily operated by the included hand control. It is designed with a scissor-like structure that ensures elevation without lateral displacement for better space management. It allows to adjust the backrest inclination both positively, up to 60º, and negatively, up to -35º, depending on the type of treatment being performed.

General features:
- It has 4 double wheels of 50 mm diameter that facilitate its mobility and transfer in consultation. They can be retracted by means of a manual pedal.
- The backrest inclination can be adjusted by a gas piston.
- The structure is made with a steel tube coated with epoxy powder that provides stability, resistance and durability, being able to support up to 180 kg of weight.
- The backrest is developed with a facial hole to improve the patient's position. It also incorporates the corresponding facial plug to cover the hole when necessary.
- It has a roll holder.
- Made in Spain.

Technical specifications:
- Backrest length: 55 cm.
- Seat length: 135 cm.
- Total length: 190 cm.
- Width: 70 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 50 to 90 cm.
- Positive backrest inclination angle: 60º.
- Negative backrest inclination angle: -35º.
- Structure material: steel tube coated with epoxy powder, baked in oven at 210ºC.
- Structure color: white.
- Maximum load: 180 kg.

Upholstery features:
- Fire-retardant material (see the attached image for the regulations on fire-retardant materials it complies with).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High abrasion resistance.
- Resistance to sweat and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain-resistant surface.
- It also complies with UNE EN/71-3 standard (Toy safety).

Upholstery cleaning instructions:
Any stain, spill or dirt should be immediately cleaned from the upholstery to avoid the possibility of a permanent stain. A mixture of liquid soap (neutral pH) and water or the compatible cleaners specified in the attached image should be used. The excess mixture must be completely removed with a clean, damp white cloth and the surface dried. Lacquers, strong cleaners, detergents, cleaning solutions containing xylene, ketones (MEK) or acetates, cause immediate damage and contribute to the deterioration of the material.

If you want more complete cleaning instructions, please contact us. 

Available in 60 cm wide: (Ref. 1250CE0120ABR62X)

Foam options:
If you wish, you can purchase your table with a different type of foam (at an additional cost).
-3 cm 30Kg/m³+ 2cm visco
-5 cm 150Kg/m³
-3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
-5 cm 60Kg/m³

Transportation:
Delivery of the material is at street level. It is not the carrier's obligation to bring the goods inside the customer's facilities.

*If you want to purchase the table with different characteristics in terms of upholstery, foam, structure finish and height, please contact us.