Electric armchair with independent footrest and negative backrest, 70x182cm. Various colors.

Electric chair for podiatry developed with 1 motor to adjust the height between 50 and 90 cm. Both the independent leg rests and the backrest can be adjusted in positive or negative inclination, allowing a wide range of positions depending on which best suits the needs of the procedure.

The backrest has a facial hole and is supplied with the relevant plug to cover the hole when necessary.

Features:
- Leg rest inclination: manual lever.
- Height: electric motor by hand control.
- Backrest inclination: gas piston.

Upholstery features:
- Fireproof material (see the attached image for the regulations on fireproof materials that it complies with).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistant to sweat and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistant to sunflower oils.
- Stain resistant surface.
- Complies with UNE EN/71-3 standard (Toy Safety).

Upholstery cleaning instructions:
- Any stain, spill or dirt should be cleaned quickly from the upholstery to prevent permanent staining.
- Soft soapy solutions or special vinyl fabric cleaning products should be used to remove stains from the material surface. Refer to the compatible cleaning solutions specified in the attached image.
- It is recommended to clean only with damp white cloths.
- Lacquers, strong cleaners, detergents, xylene-based liquids, acetone and MEK cause immediate damage and contribute to the deterioration of the material.

If you would like more complete cleaning instructions, please contact us.

Technical specifications:
- Backrest length: 70 cm.
- Seat length: 60 cm.
- Leg rest length: 52 cm.
- Total length: 182 cm.
- Width: 70 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 50 to 90 cm.
- Positive backrest inclination angle: 85°.
- Negative backrest inclination angle: -10°.
- Positive leg rest inclination angle: 10°.
- Negative leg rest inclination angle: -55°.
- Frame material: steel tube coated with epoxy powder, baked in oven at 210°C.
- Frame color: white.
- Maximum load: 180 kg.
- 3 years warranty.
- Made in Spain.

Foam options:
If desired, you can purchase your stretcher with a different type of foam (at an additional cost).
- 3 cm 30Kg/m³ + 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³

Transport:
The delivery of the material is at street level. It is not the carrier's obligation to bring the goods inside the customer's facilities.

* If you want to purchase the stretcher with different characteristics regarding upholstery, foam, structure finish and height, please contact us.