Reference. 1250SE1130BEXT62X
Electric chair for extractions and dialysis with 1 motor. 62x184cm. Various colors.
Electric chair for extractions and dialysis with 1 motor. Various colors and its dimensions are 62 x 184 cm.
Personal advice
Description
Electric chair for extractions and dialysis designed with 1 motor to adjust the height between 53 and 85 cm using a handy hand control. It includes armrests for extraction adjustable in height, rotating 360º and removable, being able to adapt them according to the needs of the treatment.
It is possible to tilt the backrest and the leg rest to configure the Trendelenburg position.
General features:
- The tilt of the leg rest can be adjusted from 10º up to -90º using a manual lever.
- The backrest is adjustable in tilt by means of a gas piston.
- Reinforced structure of steel coated with epoxy powder for greater consistency and stability.
- It includes an ergonomic cushion in the backrest for greater patient comfort.
- 3 years warranty.
- Made in Spain.
Upholstery features:
- Fireproof material (please see in the attached image the regulations on fireproof materials that it complies).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to sweat and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain resistant surface.
- It also complies with the UNE EN/71-3 (Toy Safety) standard.
Upholstery cleaning instructions:
Any stain, spill or dirt should be cleaned immediately from the upholstery to avoid the possibility of a permanent stain. A mixture of liquid soap (neutral pH) and water or the compatible cleaners specified in the attached image should be used. Any excess of the mixture should be completely removed with a clean, white, damp cloth and the surface dried. Lacquers, powerful cleaners, detergents, cleaning solutions containing xylene, ketones (MEK) or acetates, cause immediate damage and contribute to the deterioration of the material.
If you want more complete cleaning instructions, please contact us.
Technical specifications:
- Backrest length: 85 cm.
- Seat length: 52 cm.
- Leg rest length: 42 cm.
- Total length: 179 cm.
- Width: 62 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 53 to 85 cm.
- Backrest tilt angle: 85º.
- Positive leg rest tilt angle: 10º.
- Negative leg rest tilt angle: -90º.
- Structure material: epoxy powder coated steel tube, baked in oven at 210ºC.
- Structure color: white.
- Maximum load: 180 kg.
Foam options:
If you wish, you can purchase your stretcher with another type of foam (at an additional cost).
- 3 cm 30Kg/m³+ 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³
Transport:
Material delivery is at street level. It is not the carrier's obligation to bring the goods inside the customer's premises.
*If you wish to purchase the stretcher with different features in terms of upholstery, foam, structure finish and height, please contact us.
It is possible to tilt the backrest and the leg rest to configure the Trendelenburg position.
General features:
- The tilt of the leg rest can be adjusted from 10º up to -90º using a manual lever.
- The backrest is adjustable in tilt by means of a gas piston.
- Reinforced structure of steel coated with epoxy powder for greater consistency and stability.
- It includes an ergonomic cushion in the backrest for greater patient comfort.
- 3 years warranty.
- Made in Spain.
Upholstery features:
- Fireproof material (please see in the attached image the regulations on fireproof materials that it complies).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to sweat and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain resistant surface.
- It also complies with the UNE EN/71-3 (Toy Safety) standard.
Upholstery cleaning instructions:
Any stain, spill or dirt should be cleaned immediately from the upholstery to avoid the possibility of a permanent stain. A mixture of liquid soap (neutral pH) and water or the compatible cleaners specified in the attached image should be used. Any excess of the mixture should be completely removed with a clean, white, damp cloth and the surface dried. Lacquers, powerful cleaners, detergents, cleaning solutions containing xylene, ketones (MEK) or acetates, cause immediate damage and contribute to the deterioration of the material.
If you want more complete cleaning instructions, please contact us.
Technical specifications:
- Backrest length: 85 cm.
- Seat length: 52 cm.
- Leg rest length: 42 cm.
- Total length: 179 cm.
- Width: 62 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 53 to 85 cm.
- Backrest tilt angle: 85º.
- Positive leg rest tilt angle: 10º.
- Negative leg rest tilt angle: -90º.
- Structure material: epoxy powder coated steel tube, baked in oven at 210ºC.
- Structure color: white.
- Maximum load: 180 kg.
Foam options:
If you wish, you can purchase your stretcher with another type of foam (at an additional cost).
- 3 cm 30Kg/m³+ 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³
Transport:
Material delivery is at street level. It is not the carrier's obligation to bring the goods inside the customer's premises.
*If you wish to purchase the stretcher with different features in terms of upholstery, foam, structure finish and height, please contact us.












