Hydraulic 3-section stretcher, 62x189, scissor structure and central fold. Various colors.

Hydraulic 3-section treatment table, scissor structure and central fold. Various colors and its dimensions are 62 x 189 cm.

Personal advice

Hydraulic 3-section stretcher, 62x189, scissor structure and central fold. Various colors.

Color

Color structure

1.149,05€ (1.390,35€ VAT INCLUDED)

Secure payment

Check availability

Inquiry about the product

Description

3-body stretcher for physiotherapy that can be adjusted in height by hydraulic actuation up to 100 cm. It has been developed with a scissor-type structure that guarantees a rise without lateral displacement, as well as allowing a central fold of up to 14 cm elevation between the seat and the leg rest.

Ergonomic design backrest:
The backrest is adjustable/reclinable up to 70° by means of a manual lever to position the patient's back in the posture required for each treatment. In addition, it contains a facial hole for greater comfort in the prone position and includes the appropriate facial plug to cover the hole when necessary.

Great stability and resistance:
The structure and chassis of the stretcher are made of steel tube covered with epoxy powder that is capable of supporting up to 180 kg of weight. Thanks to its scissor-type design, it allows a straight lift without lateral displacement, which ensures better space management. It is also important to note that the legs have adjustable levelers that prevent small unevenness in the floor and provide great stability.

The upholstery color can be chosen from a wide range of shades.

Includes paper roll holder.

Upholstery features:
- Fireproof material (see in the attached image the regulations on fireproof materials it complies with).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High abrasion resistance.
- Resistance to perspiration and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistant to sunflower oils.
- Surface resistant to stains.
- Complies with UNE EN/71-3 standard (Toy safety).

Upholstery cleaning instructions:
- Any stain, spillage or dirt should be quickly cleaned from the upholstery to prevent permanent staining.
- Soft soapy solutions or special vinyl fabric cleaning products should be used to remove stains from the material surface. Check the compatible cleaning solutions specified in the attached image.
- It is recommended to clean only with damp white cloths.
- Lacquers, strong cleaners, detergents, xylene-based liquids, acetone and MEK cause immediate damage and contribute to the deterioration of the material.

If you want more complete cleaning instructions, please contact us.

Foam options:
If you wish, you can purchase your stretcher with another type of foam (at an additional cost).
- 3 cm 30Kg/m³+ 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³

Technical specifications:
- Backrest length: 75 cm.
- Seat length: 52 cm.
- Leg rest length: 62 cm.
- Total length: 189 cm.
- Width: 62 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 54 to 100 cm.
- Backrest tilt angle: 70°.
- Central fold elevation: 14 cm.
- Structure material: epoxy powder coated steel tube, baked in oven at 210°C.
- Structure color: silver.
- Maximum load: 180 kg.
- 3-year warranty.
- Made in Spain.

Transport:
Material delivery is at street level. It is not the responsibility of the carrier to bring the goods inside the customer's facilities.

*If you wish to purchase the stretcher with different features in terms of upholstery, foam, structure finish and height, please contact us.