Electric armchair with 1 motor 62x182cm with negative reclining backrest. Various colors.

Electric chair with practical and functional design developed with 1 motor to regulate the height from 50 to 90 cm through a convenient hand control. The upholstery of faux leather with high-density foam guarantees the maximum comfort of the patient during the treatment process.

General Features:
- The backrest can recline positively and negatively using a gas piston.
- The footrest can be manually adjusted for inclination using a lever.
- The structure and chassis are made with highly resistant steel tubing.
- The backrest has a facial hole and comes with the corresponding facial plug to cover the hole when needed.
- 3-year warranty.
- Made in Spain.

Upholstery features:
- Fireproof material (see attached image for regulations on fireproof materials).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to perspiration and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain-resistant surface.
- Complies with UNE EN/71-3 standard (Toy safety).

Upholstery cleaning instructions:
- Any stain, spill or dirt must be quickly cleaned from the upholstery to avoid permanent staining.
- Gentle soapy solutions or special vinyl fabric cleaning products should be used to remove stains from the surface of the material. See the compatible cleaning solutions specified in the attached image.
- It is recommended to clean only with damp white cloths.
- Lacquers, strong cleaners, detergents, xylene-based liquids, acetone and MEK cause immediate damage and contribute to the material's deterioration.

If you want more complete cleaning instructions, please contact us.

Technical specifications: 
- Backrest length: 70 cm.
- Seat length: 60 cm.
- Footrest length: 52 cm.
- Total length: 182 cm.
- Width: 62 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 50 to 90 cm.
- Positive backrest inclination angle: 85º.
- Negative backrest inclination angle: -10º.
- Positive footrest inclination angle: 10º.
- Negative footrest inclination angle: -60º.
- Structure material: epoxy powder coated steel tube, baked at 210ºC.
- Structure color: white.
- Maximum load: 180 kg.

Foam options:
If you wish, you can purchase your stretcher with a different type of foam (at an additional cost).
- 3 cm 30Kg/m³+ 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³

Shipping:
Material delivery is at street level. It is not the carrier's responsibility to bring the goods inside the customer's facilities.

*If you want to purchase the stretcher with different features in terms of upholstery, foam, structure finish and height, please contact us.