Sterilizable fanny pack plain 280x141x40 mm - 1600 ml capacity

Sterilizable flat fanny pack 280x141x40 mm - 1600 ml capacity

Autoclavable at 121 ºC

AISI 304 stainless steel with a minimum thickness of 0.6 mm.

The product must be thoroughly cleaned with hot water for the first time and after each use, disinfected, rinsed possibly with distilled water, and dried with extreme care. It also needs to be sterilized before the next use. The product can be cleaned in ultrasound tanks and disinfected in instrument washing machines up to a temperature of 95°C (203°F). After cleaning, and before sterilization, it is recommended to treat the instruments with physiologically safe oil, especially regarding the tips, connectors, terminals, and all moving parts. Pay close attention to ensure the product does not come into contact with acids or other aggressive disinfectants that could corrode it. The recommended sterilization method is steam in autoclave, the temperature of the cycle must not exceed 135°C (275°F) for a maximum of 15 minutes, to avoid damaging the product. For hot air sterilization, a temperature between 180° and 200°C is advised. The products can also be disinfected in instrument washing machines up to a temperature of 121°C. Instruments that show signs of corrosion must be immediately discarded. During the warranty period, all defective parts due to well-proven manufacturing causes will be repaired and/or replaced free of charge, excluding labor costs, travel, transport costs, packaging, etc. Damages caused by improper use of the product are not covered by the warranty.