Sterilizable plain fanny pack 207x128x33 mm - 480 ml capacity

Sterilizable flat fanny pack 207x128x33 mm - 480 ml capacity

Autoclavable at 121 ºC

Stainless steel AISI 304 with a minimum thickness of 0.6 mm.

The product must be thoroughly cleaned with hot water for the first time and after each use, disinfected, possibly rinsed with distilled water, and dried with extreme care, it must also be sterilized before subsequent use. The product can be cleaned in ultrasound tanks prepared for this purpose and disinfected in instrument washing machines up to a temperature of 95°C (203°F). After cleaning it, and before sterilization, it is recommended to treat the instruments with physiologically safe oil, especially in relation to tips, connectors, terminals, and all moving parts. Great care should be taken to ensure that the product does not come into contact with acids or other aggressive disinfectants that could corrode it. The recommended sterilization method is steam in an autoclave, the cycle temperature should not exceed 135°C (275°F) for a maximum of 15 minutes, to avoid damaging the product. For hot air sterilization, a temperature between 180° and 200°C is advised. The products can also be disinfected in instrument washing machines up to a temperature of 121°C. Instruments showing signs of corrosion must be immediately discarded. During the warranty period, all defective parts due to well-proven manufacturing causes will be repaired and/or replaced free of charge, excluding labor, travel, transport, packaging, etc. costs. Damages caused by improper use of the product are not covered by the warranty.