Volumetric infusion pump Smart

This volumetric infusion pump has been carefully designed so that the administration of drugs intravenously is easy to set up and can be correctly adapted to the needs of each patient. Its design has been meticulously studied to also be comfortable to transport and overcome the limitations that health professionals often encounter in their profession. For this reason, it includes all kinds of unique features that streamline and optimize workflow and improve the infusion experience, such as its intuitive system for regulating parameters or its large display screen.

Its innovative operating software offers the user multiple advantages over similar models on the market, such as compatibility with hospital information systems or its great connectivity. In addition, it has several alarm mechanisms that alert the user to operating anomalies that may compromise the integrity of the treatment, ensuring at all times the health and safety of the patient. For all these reasons, the Terumo Smart volumetric infusion pump has positioned itself as one of the most efficient, versatile and economical options today.

Features
- 4.3-inch screen for clearer information viewing
- Intuitive interface for easy parameter control
- Simple adjustment of disposable devices and quick regulation thanks to its button wheel
- Lightweight housing and built-in handle for easy transport and attachment
- Adjustable docking system for installation on horizontal or vertical support bars
- Includes Drug Library module for color, pattern, and FDA-approved abbreviations (contact us for customization)
- Incorporates a system of visual alarms classified according to their priority level: yellow (low) and red (high)
- Equipped with an anti-free flow (AFF) system to prevent over-infusion
- Able to connect with other Smart systems (via wifi and wired LAN) and link with other pumps via rack (not included and at an additional cost)
- Suitable for downloading historical data and connecting to hospital information systems
- Custom dosage configuration in options of ml/h, µg/kg/min and mg/kg/h
- Adjustable rate in intermittent, delayed start or multi-step modes
- Compatible infusion consumables must be purchased (Ref. 1031PTPU400WY) to use it
- 2-year quality guarantee

Technical Specifications
- Dimensions: 120 x 253 x 120 mm
- Weight: 2 kg
- Flow rate adjustment range without drip sensor: 0.10 - 1200.00 ml/h
- Flow rate adjustment range with drip sensor: 0.10 - 1200.00 ml/h (with 20 drops/ml adjustment) and 0.10 - 300.00 ml/h (with 60 drops/ml adjustment)
- Disposable material compatibility: suitable only for specific Terumo infusion sets (with free flow protection)
- Change in flow rate display: 0.10 ml/h step (0.10 - 100.00 ml/h), 1.00 ml/h step (100.00 - 1200.00 ml/h), 0.00 ml/h step when turning on the device
- Dose mode: ml/h, µg/kg/min, mg/kg/h, drug library option
- Advanced infusion modes: Interval/Intermittent Mode, Ramp Mode, Delayed Start Mode (to use any of these modes, the drug library must be installed)
- Combined infusion modes: Solo Mode and Par Piggyback Mode
- KVO (Keep Vein Open): from 0.10 to 3.00 ml/h (without drip sensor), fixed 3.00 ml/h (if a 20 drops/ml infusion set is used) and from 1.00 to 3.00 ml/h (if a 60 drops/ml infusion set is used) (contact us if you wish to purchase your pump with this function)
- Drug library capacity: up to 3000 drug entries and up to 30 user-defined profiles
- Free flow protection: anti-free flow system installed in the line
- Alarms: upper occlusion alarm, lower occlusion alarm, near-empty alarm, pressure alarm, air in line alarm, door alarm, abnormal flow alarm, free flow alarm, empty line alarm, poor placement of drip sensor alarm, battery alarm, shutdown signal alarm, electrical failure alarm, re-alarm, pending start, absence of flow rate alarm, absence of VTBI alarm, termination alarm, interruption of connection alarm
- Power supply: 100-240 V AC, 50-60 Hz, lithium-ion battery (internal battery), NiMH battery (auxiliary battery)
- Main battery operating time: ~5 hours (at 25 ml/h and 25 °C, with a fully charged new battery)
- Main battery charging time: ≥ 8 hours (when charging with an AC power supply with the device off). The battery can reach 80% charge in 3 hours.
- External communication function: IrDA and wireless LAN (IEEE802.11b and IEEE802.11b/g/n)

Classification and Compliance with Standards
- Class I equipment with internal power, CF-type applied component defibrillation-proof (according to IEC/EN 60601-1 standard)
- Class IIb medical device (according to Council Directive 93/42/EEC)
- Manufactured in accordance with IEC/EN 60601-1-2 and IEC/EN 60601-2-24
- IP22 classification according to its level of protection against penetration of water or harmful particles

Included Accessories
- AC power cord
- Bar clamp (thread type)
- Instruction manual
- Customized Drug Library (contact us for more details)*
- KVO Mode (contact us for more details)*

Optional Accessories (not included and at an additional cost)
- Automatic bar clamp

* Both KVO Mode and the Drug Library must be activated during product manufacture. Please contact us if you want to know more details about this.