Set of 120 ml jar (57 x 73 mm) in polypropylene and vacuum tube

Flask designed for use with vacuum tubes. They allow for a clean transfer of the urine test contained in the flask directly to the vacuum tube.

Made of transparent polypropylene. Airtight cap in yellow polyethylene with an inner sealing ring. It incorporates a cannula with a suction nozzle and a needle, protected by a rubber cap.

Graduated up to 100 ml (without cap)

Maximum volume with lid: 120 ml, recommended volume 60 ml

The set of flask and vacuum tube comes sterile, in an individual bag.

Round bottom tube 16 x 100 mm, prepared to aspirate 9.5 ml of sample. No preservative.

Transfer process:

1. Remove the label located on the cap until the cannula is exposed.

2. Insert the tube with the cap facing down.

3. Press the tube until the rubber is pierced with the needle. The tube will aspirate the sample. Repeat if more tubes need to be filled.

4. Remove the tube when finished aspirating the sample.

5. Replace the label covering the hole.

This closed system is completely hygienic and safe. It not only prevents sample loss due to spillage, but also contamination of the sample, user, and work environment.