Non-chlorinated disinfectant for surfaces Sanit P20. 5L bottle

Non-chlorinated disinfectant optimal for critical areas where high hygienic conditions are required and where there is presence of dirt, such as floors or walls. It contains amines that do not leave residues, making it a product suitable for regular and continuous use.

It is an alternative to chlorinated disinfectants and aldehydes as it does not contain phenolic compounds.

Certificates:
- Effectiveness against Coronavirus according to UNE-EN 14476 (dilution at 2% for 30 seconds).
- Bactericidal: UNE-EN 1276 (dilution at 2%).
- Fungicidal: UNE-EN 1650 (dilution at 3%).
- Bactericidal for Lysteria: UNE-EN 1276 (dilution at 0.075%).
- Virucidal: UNE-EN 14476 (dilution at 8%).
- Sustainable environmental management: UNE-EN ISO 14001.
- Production process respectful of the environment, occupational safety and health and social responsibility: IQNet.
- Tested quality: UNE-EN ISO 9001.

Technical specifications:
- Dosage: 0.5-2% (2-4 valve strokes for every 5 L of water).
- Appearance: transparent blue.
- Density: 1.02 ±0.02.
- Refraction index: 25 ±2.
- % pH: 11.2 ±0.5.
- Without phenolic compounds.
- Without aldehydes.
- Without residues.

Other components:
- 4.5% didecyl dimethyl ammonium chloride.
- 8% monoethanolamine.

Instructions for use:
- It is recommended to clean the surface before disinfection.
- Dilute the product at the appropriate dose.
- Apply the solution manually with a mop or aseptic cloth.

Possibility to purchase the dosing valve with reference 12400000739.

5 L carboy.