Reference. 1250CH2135ABPR70X
Hydraulic podiatry couch with 3 sections, 70x184cm, armrests and negative backrest. Various colors.
Hydraulic podiatry stretcher with 3 sections, armrests and negative backrest. Various colors.
Its dimensions are 70 x 184 cm.
Its dimensions are 70 x 184 cm.
Personal advice
Description
Hydraulic 3-section chair-couch for podiatry designed with independent leg rests, reclining both in positive and negative positions, and foldable flat armrests, all to adapt the patient's position according to the treatment needs. It is possible to adjust its height by hydraulic operation, being able to raise it up to a maximum of 90 cm. And, in addition, to facilitate its mobility in the office, it has 4 double wheels of 50 mm in diameter, retractable by a pedal.
It has been manufactured with top-quality materials to ensure maximum durability and resistance.
General characteristics:
- The backrest has a facial hole for greater patient comfort in the prone position. The couch comes equipped with the relevant facial plug to hide the hole when necessary.
- Using a gas piston, it is possible to adjust the inclination of the backrest both in positive and negative positions.
- The independent leg rests can be adjusted in inclination, both in positive and negative positions, by means of a manual lever.
- The manufacturing material of the structure and chassis is a steel tube coated with epoxy powder for greater stability and resistance.
- 3-year warranty.
- Made in Spain.
Upholstery characteristics:
- Fireproof material (please refer to the attached image for the regulations on fireproof materials that it complies with).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to human sweat and saliva.
- Resistant to urine, blood, and UV light.
- Waterproof.
- Resistance to sunflower oil.
- Stain-resistant surface.
- Complies with UNE EN/71-3 (Toy Safety) standard.
Upholstery cleaning instructions:
- Any stain, spill, or dirt should be quickly cleaned from the upholstery to avoid permanent staining.
- Mild soapy solutions or special vinyl fabric cleaning products should be used to remove stains from the material surface. Please refer to the compatible cleaning solutions specified in the attached image.
- Cleaning is recommended only with damp white cloths.
- Lacquers, strong cleaners, detergents, xylene-based liquids, acetone, and MEK cause immediate damage and contribute to the deterioration of the material.
If you want more complete cleaning instructions, please contact us.
Technical specifications:
- Backrest length: 70 cm.
- Seat length: 62 cm.
- Leg rest length: 52 cm.
- Total length: 184 cm.
- Width: 70 cm.
- Foam thickness: 5 cm.
- Foam density: 30 kg/m³.
- Adjustable height: 50 to 90 cm.
- Positive backrest inclination angle: 85º.
- Negative backrest inclination angle: -15º.
- Positive leg rest inclination angle: 10º.
- Negative leg rest inclination angle: -50º.
- Structure material: epoxy powder-coated steel tube, oven-baked at 210ºC.
- Structure color: white.
- Maximum load: 180 kg.
Foam options:
If you wish, you can purchase your couch with a different type of foam (at an additional cost).
- 3 cm 30Kg/m³ + 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³
Transport:
The delivery of the material is at street level. The carrier is not obliged to bring the goods inside the customer's facilities.
*If you wish to purchase the couch with different characteristics in terms of upholstery, foam, structure finish, and height, please contact us.
It has been manufactured with top-quality materials to ensure maximum durability and resistance.
General characteristics:
- The backrest has a facial hole for greater patient comfort in the prone position. The couch comes equipped with the relevant facial plug to hide the hole when necessary.
- Using a gas piston, it is possible to adjust the inclination of the backrest both in positive and negative positions.
- The independent leg rests can be adjusted in inclination, both in positive and negative positions, by means of a manual lever.
- The manufacturing material of the structure and chassis is a steel tube coated with epoxy powder for greater stability and resistance.
- 3-year warranty.
- Made in Spain.
Upholstery characteristics:
- Fireproof material (please refer to the attached image for the regulations on fireproof materials that it complies with).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to human sweat and saliva.
- Resistant to urine, blood, and UV light.
- Waterproof.
- Resistance to sunflower oil.
- Stain-resistant surface.
- Complies with UNE EN/71-3 (Toy Safety) standard.
Upholstery cleaning instructions:
- Any stain, spill, or dirt should be quickly cleaned from the upholstery to avoid permanent staining.
- Mild soapy solutions or special vinyl fabric cleaning products should be used to remove stains from the material surface. Please refer to the compatible cleaning solutions specified in the attached image.
- Cleaning is recommended only with damp white cloths.
- Lacquers, strong cleaners, detergents, xylene-based liquids, acetone, and MEK cause immediate damage and contribute to the deterioration of the material.
If you want more complete cleaning instructions, please contact us.
Technical specifications:
- Backrest length: 70 cm.
- Seat length: 62 cm.
- Leg rest length: 52 cm.
- Total length: 184 cm.
- Width: 70 cm.
- Foam thickness: 5 cm.
- Foam density: 30 kg/m³.
- Adjustable height: 50 to 90 cm.
- Positive backrest inclination angle: 85º.
- Negative backrest inclination angle: -15º.
- Positive leg rest inclination angle: 10º.
- Negative leg rest inclination angle: -50º.
- Structure material: epoxy powder-coated steel tube, oven-baked at 210ºC.
- Structure color: white.
- Maximum load: 180 kg.
Foam options:
If you wish, you can purchase your couch with a different type of foam (at an additional cost).
- 3 cm 30Kg/m³ + 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³
Transport:
The delivery of the material is at street level. The carrier is not obliged to bring the goods inside the customer's facilities.
*If you wish to purchase the couch with different characteristics in terms of upholstery, foam, structure finish, and height, please contact us.












