Hydraulic 3-section armchair with armrests, 70x184cm. Various colors

Hydraulic-driven stretcher made of top-quality materials and designed with a 3-body structure that, thanks to its reinforced structure, withstands even the most energetic movements during therapeutic and rehabilitation massages. It has 2 flat folding armrests that are ideal to prevent bad postures and ensure maximum comfort for the patient. Moreover, it can be height-adjusted between 50 and 90 cm depending on the treatment requirements.

General features:
- It has 4 double wheels of 50 mm in diameter, retractable by pedal. They are ideal to easily and comfortably move the stretcher.
- Through a gas piston, it is possible to adjust the inclination of the leg rest and the backrest according to the procedure needs.
- It has been developed with a reinforced structure of steel tubing for greater strength and stability, being able to withstand up to 180 kg.
- The backrest is designed with a facial hole to facilitate the patient's positioning. It also comes with a facial plug to cover the hole when required by the treatment.
- Equipped with a paper roll holder.
- Made in Spain.
- 3 years warranty.

Upholstery features:
- Fireproof material (see the regulations on fireproof materials it complies with in the attached image).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistant to sweat and human saliva.
- Resistant to urine, blood, and UV light.
- Waterproof.
- Resistant to sunflower oils.
- Stain-resistant surface.
- Compliant with UNE EN/71-3 standard (Toy Safety).

Upholstery cleaning instructions:
- Any stain, spill, or dirt must be quickly cleaned from the upholstery to prevent permanent staining.
- Use mild soapy solutions or special cleaning products for vinyl fabrics to remove stains from the material's surface. Check the compatible cleaning solutions specified in the attached image.
- It is recommended to clean only with damp white cloths.
- Lacquers, strong cleaners, detergents, xylene-based liquids, acetone, and MEK cause immediate damage and contribute to the material's deterioration.

If you want more comprehensive cleaning instructions, please contact us.

Technical specifications:
- Backrest length: 70 cm.
- Seat length: 62 cm.
- Leg rest length: 52 cm.
- Total length: 184 cm.
- Width: 70 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 50 to 90 cm.
- Backrest tilt angle: 85º.
- Positive leg rest tilt angle: 10º.
- Negative leg rest tilt angle: -50º.
- Structure material: epoxy powder-coated steel tube, baked at 210ºC.
- Structure color: white.
- Maximum load: 180 kg.

Foam options:
If desired, you can purchase your stretcher with a different type of foam (at an additional cost).
-3 cm 30Kg/m³+ 2cm visco
-5 cm 150Kg/m³
-3 cm 150Kg/m³
-4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³

Transport:
The delivery of the material is at street level. It is not the responsibility of the carrier to bring the goods inside the customer's facilities.

*If you want to purchase the stretcher with different features regarding the upholstery, foam, structure finish, and height, please contact us.