HLP Smart Water Purifier, 10 L capacity

This latest generation purifier has been meticulously developed to obtain demineralized water for use in laboratory analysis. With a compact design, an LCD screen, and an intuitive operating interface, it is comfortable, practical, and easy to use. All this is accompanied by its measurement and control system regulated by a microprocessor, which guarantees optimal accuracy in line with the most demanding quality standards in the field.

The purifier performs the process in 4 phases, passing through an external pre-filter for sediments; a mechanical filtration with activated carbon and softening; a reverse osmosis and a demineralization process in a mixed bed ion exchange column. The result is purified water with minimal conductivity and whose characteristics comply with the ISO 3696:1999 standard, making it suitable for laboratory analysis solutions, chemical reagents, autoclave sterilizations, and clinical analyzers.

General features
- Automatic purification equipment from tap water
- Equipped with a latest generation microprocessor measurement and control system
- Includes a conductometer to measure the temperature and conductivity of the purified water
- It has a temperature compensation system to guarantee optimal results
- Generates purified water adhering to the ISO 3696:1999 standard, suitable for solutions, buffer solutions, chemical reagents, autoclaves, and clinical analyzers
- Stops automatically after completely filling its purified water tank
- It has a clock that shows the date and time in real time and a pressure gauge for the incoming water
- Provides information on the operating status of the system, with alarms for replacement of the integrated module and the ion exchange module
- Incorporates an RS 232 interface for communication with a computer, individual adjustment of the service frequency, and regulation of alarm levels

Technical specifications
- Supply: tap water
- Dimensions: 200 x 375 x 420 mm
- Purified water production capacity: 4 - 4.5 L/h
- Conductivity of purified water obtained: 0.06 μS/cm
- Purified water tank capacity: 10 L
- Notices: monitoring messages/alarm
- Software: external

Feed water requirements
- Conductivity: < 1200 μS/cm
- Minimum pressure: 3 bar
- Temperature: 5 - 40°C
- Hardness: < 250 mg CaCO3/dm3
- Iron: < 0.2 mg/dm3

Installation requirements
- Tap: tap with ½” or ¾” connection
- Drainage: evacuation to sewer
- Power supply: 230 V/50 Hz

Certificates
- 2014/35/EU
- 2014/30/EU

Compatible spare parts (not included and with additional cost)
- 5 um prefilter cartridge (approximately 6 months duration) (Ref. 1187PDD008)
- A2 Softener (approximately 6 months duration) (Ref. 1187PDD007)
- H7 Ion Exchange (changeable every 2000 L, approximately) (Ref. 1187PDD009)