Camilla with 2 fixed sections, adjustable height and short backrest. 60x190cm. Various colors and structures.

Fixed stretcher with a practical and functional design that is designed with 2 bodies and can be adjusted in height thanks to the removable legs it has. It is possible to manually recline the 55 cm backrest to adapt the patient's position to the needs of the procedure being performed. In addition, the upholstery is available in a wide range of colors in order to meet the aesthetic requirements of each clinic.

Possibility to choose, at an additional cost, the width of the stretcher.

General features general:
- Measurements: 62x190 cm.
- Backrest with facial hole and corresponding plug.
- Possibility to recline the backrest up to 88º.
- Removable and adjustable legs at 3 heights: 65, 70 and 75 cm.
- Incorporates roll holder. 
- 3-year warranty.
- Made in Spain.

Upholstery features:
- Fireproof material (see in the attached image the regulations on fireproof materials it complies with).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to sweat and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain-resistant surface.
- Complies with UNE EN/71-3 standard (Toy Safety).

Upholstery cleaning instructions:
- All stains, spills or dirt must be quickly cleaned from the upholstery to prevent permanent staining.
- Mild soapy solutions or special vinyl fabric cleaners should be used to remove stains from the material's surface. Consult the compatible cleaning solutions specified in the attached image.
- It is recommended to clean only with damp white cloths.
- Lacquers, strong cleaners, detergents, xylene-based liquids, acetone and MEK cause immediate damage and contribute to material deterioration. 

If you need more detailed cleaning instructions, please contact us. 

Technical specifications: 
- Width: 62
- Backrest length: 55 cm.
- Seat length: 135 cm.
- Total length: 190 cm.
- Foam thickness: 5 cm. 
- Foam density: 30 k/m³.
- Adjustable height: 65-70-75 cm.
- Backrest tilt angle: 88º.
- Structure material: epoxy powder coated steel tube, oven baked at 210º.
- Structure color: white.
- Maximum load: 300 kg. 

Foam options:
If you wish, you can purchase your stretcher with a different type of foam (at an additional cost).
- 3 cm 30Kg/m³+ 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³

Transport:
The delivery of the material is to the street. It is not the carrier's obligation to bring the goods inside the customer's facilities.

*If you want to buy the stretcher with different features in terms of upholstery, foam, structure finish and height, please contact us.