Fixed 2-section stretcher with adjustable height. 70 x 190 cm. Various colors and structures.

Two-section fixed stretcher made with a high-strength metallic structure that supports up to 300 kg of weight. It is developed with four removable and adjustable legs that allow positioning the stretcher at 65, 70 or 75 cm in height. The adjustable backrest allows a tilt angle of 88°, in addition to having a facial hole to better position the patient.

Possibility to choose, at an additional cost, the width of the stretcher.

General characteristics: 
- 4 removable legs adjustable to 3 heights (65-70-75 cm). 
- It has a facial hole with its corresponding plug. 
- Equipped with a roll holder.
- Reclining backrest. 
- 3-year warranty.
- Made in Spain.

Upholstery characteristics:
- Fireproof material (see in the attached image the regulation on fireproof materials it complies with).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to perspiration and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain-resistant surface.
- Also complies with UNE EN/71-3 standard (Toy Safety).

Upholstery cleaning instructions:
Any stain, spill or dirt should be immediately cleaned from the upholstery to avoid the possibility of a permanent stain. A mixture of liquid soap (neutral pH) and water or the compatible cleaners specified in the attached image should be used. The excess of the mixture should be completely removed with a clean, damp white cloth and the surface dried. Lacquers, strong cleaners, detergents, cleaning solutions containing xylene, ketones (MEK) or acetates, cause immediate damage and contribute to the deterioration of the material.

If you want more complete cleaning instructions, please contact us. 

Technical specifications: 
- Width: 70 cm.
- Backrest length: 70 cm.
- Seat length: 120 cm.
- Total length: 190 cm. 
- Adjustable height: 65-70-75 cm.
- Backrest tilt angle: 88°.
- Structure material: epoxy powder-coated steel tube, baked at 210°.
- Structure color: white.
- Maximum load: 300 kg. 

Foam options:
If you wish, you can purchase your stretcher with another type of foam (at an additional cost).
- 3 cm 30Kg/m³+ 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³

Transport:
The delivery of the material is at street level. It is not the transporter's obligation to bring the goods inside the client's facilities.

*If you want to purchase the stretcher with different characteristics in terms of upholstery, foam, structure finish and height, please contact us.