Electric stretcher 2 bodies, scissor structure, 70x190cm, backrest reclining in negative and roll holder. Various colors.

2-section electric examination table with reclining backrest in negative, roll holder, facial plug and retractable wheels.

ColorColor structure

1.840,53€ (2.227,04€ VAT INCLUDED)

Secure payment

Check availability

Inquiry about the product

Description

A 2-body stretcher for physiotherapy and rehabilitation, adjustable in height from 50 to 90 cm through an electric motor that is easily activated by the hand control it includes. It is developed with a scissor-type structure that guarantees an elevation without lateral displacement for better space management. It allows adjusting the inclination of the backrest both in positive, up to 60º, and in negative, up to -35º, depending on the type of treatment being performed.

General features:
- It has 4 double wheels of 50 mm in diameter that facilitate its mobility and transfer in consultation. They can be stowed by means of a manual activation pedal.
- The inclination of the backrest can be adjusted by means of a gas piston.
- The structure is made with a steel tube coated with epoxy powder that provides stability, resistance and durability, being able to support up to 180 kg of weight.
- The backrest has been developed with a facial hole to improve the patient's position. It also incorporates the corresponding facial plug to cover the hole when necessary.
- It has a roll holder.
- Made in Spain.

Technical specifications:
- Backrest length: 55 cm.
- Seat length: 135 cm.
- Total length: 190 cm.
- Width: 70 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 50 to 90 cm.
- Backrest inclination angle in positive: 60º.
- Backrest inclination angle in negative: -35º.
- Structure material: steel tube coated with epoxy powder, baked in oven at 210ºC.
- Structure color: white.
- Maximum load: 180 kg.

Upholstery characteristics:
- Flame retardant material.
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High abrasion resistance.
- Resistance to sweat and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain resistant surface.
- It also complies with the standard UNE EN/71-3 (Toy Safety).

Foam options:
If you wish, you can purchase your stretcher with another type of foam (at an additional cost).
- 3 cm 30Kg/m³+ 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³

Upholstery cleaning instructions:
Any stain, spill or dirt should be immediately cleaned from the upholstery to prevent the possibility of a permanent stain. A mixture of liquid soap (pH neutral) and water or the compatible cleaners specified in the attached image should be used. Any excess of the mixture should be completely removed with a clean, wet, white cloth and the surface dried. Lacquers, strong cleaners, detergents, cleaning solutions containing xylene, ketones (MEK) or acetates, cause immediate damage and contribute to the deterioration of the material.

If you require more comprehensive cleaning instructions, please contact us.

Transportation:
The delivery of the material is at street level. It is not the carrier's obligation to bring the goods inside the customer's facilities.

*If you wish to purchase the stretcher with different features in terms of upholstery, foam, structure finish and height, please contact us.