Electric stretcher 4 bodies, 70x185cm, scissor structure and double armrests. Various colors

A 4-section table for physiotherapy and rehabilitation, height adjustable from 50 to 90 cm via an electric motor, conveniently operated by an included hand control. It is designed with a scissor-type structure that ensures a lift without lateral displacement for better space management. It allows to adjust the inclination of the backrest both positively, up to 45º, and negatively, down to -50º, depending on the type of treatment being performed.

It incorporates armrests at the backrest level, which can be adjusted in height and moved laterally, and has another pair of armrests at the seat level, in this case with a foldable design.

General features:
- It has 4 double wheels of 50 mm diameter that facilitate its mobility and transfer in consultation. They can be retracted by means of a manual pedal.
- The inclination of the backrest can be adjusted by a gas piston.
- The structure is made from a steel tube coated in epoxy powder that provides stability, resistance and durability, supporting up to 180 kg of weight. 
- The backrest is developed with a facial plug to improve the patient's position. It also incorporates the corresponding facial plug to cover the hole when necessary. 
- It has a roll holder.
- Made in Spain.
- 3 years warranty.

Upholstery features:
- Fireproof material (please consult the attached image for the regulations on fireproof materials it complies with).
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to perspiration and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain-resistant surface.
- It also complies with the UNE EN/71-3 (Toy safety) standard.

Foam options:
If you wish, you can purchase your table with a different type of foam (at an additional cost).
- 3 cm 30Kg/m³+ 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³

Upholstery cleaning instructions:
Any stain, spill or dirt must be cleaned immediately from the upholstery to prevent the possibility of a permanent stain. A mixture of liquid soap (neutral pH) and water or the compatible cleaners specified in the attached image should be used. The excess mixture must be completely removed with a clean, white, damp cloth and the surface dried. Lacquers, strong cleaners, detergents, cleaning solutions containing xylene, ketones (MEK) or acetates, cause immediate damage and contribute to the deterioration of the material.

If you require more comprehensive cleaning instructions, please contact us. 

Technical specifications:
- Backrest length: 50 cm.
- Seat length: 135 cm.
- Total length: 185 cm.
- Total width: 70 cm.
- Armrest length: 43.5 cm.
- Armrest width: 8.5 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 50 to 90 cm.
- Positive backrest inclination angle: 45º.
- Negative backrest inclination angle: -50º.
- Structure material: epoxy powder coated steel tube, baked at 210ºC.
- Structure color: white.
- Maximum load: 180 kg.

Available in 62 cm width: Ref. 1250CE0140ABR62X.

Shipping:
Delivery is to the street level. It is not the transporter's obligation to bring the goods inside the customer's facilities.

*If you wish to purchase the table with different features in terms of upholstery, foam, structure finish and height, please contact us.