Reference. 1250CE2129R70X
Electric examination table with 2 sections. 70x190. With roll holder and retractable wheels. Various colors.
2-section electric examination table with roll holder, facial plug and retractable wheels. Dimensions: 70 x 190 cm.
Personal advice
Description
2-body stretcher developed with an electric motor that allows its height to be adjusted by means of a handy hand control. The backrest can recline up to 85º depending on the needs of the treatment. In addition, it has retractable wheels operated by pedals.
General features:
- The backrest has been developed with a facial hole to improve the patient's positioning in the prone position. In addition, it incorporates the relevant facial plug designed to conceal the hole when the characteristics of the treatment require it.
- Height adjustable by hand control.
- The backrest is adjustable in tilt by gas piston.
- Double wheels of Ø 65mm retractable by pedals.
- It has a roll holder.
- Made in Spain.
Technical specifications:
- Backrest length: 70 cm.
- Seat length: 120 cm.
- Total length: 190 cm.
- Width: 70 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 54 to 93 cm.
- Backrest tilt angle in positive: 85º.
- Structure material: steel tube coated with epoxy powder, baked in oven at 210ºC.
- Structure color: white.
- Maximum load: 180 kg.
Upholstery features:
- Flame retardant material.
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to sweat and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain resistant surface.
- Compliant with UNE EN/71-3 standard (Toy safety).
Foam options:
If you wish, you can purchase your stretcher with another type of foam (at an additional cost).
- 3 cm 30Kg/m³+ 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³
Upholstery cleaning instructions:
- Any stain, spill or dirt should be quickly cleaned from the upholstery to prevent permanent staining.
- Soft soap solutions or special vinyl fabric cleaners should be used to remove stains from the material surface. Consult the compatible cleaning solutions specified in the attached image.
- It is recommended to clean only with damp white cloths.
- Lacquers, strong cleaners, detergents, xylene-based liquids, acetone and MEK cause immediate damage and contribute to the deterioration of the material.
If you need more complete cleaning instructions, please contact us.
Transport:
Material delivery is at street level. It is not the obligation of the carrier to bring the merchandise inside the client's facilities.
*If you wish to purchase the stretcher with different characteristics regarding upholstery, foam, structure finish and height, please contact us.
General features:
- The backrest has been developed with a facial hole to improve the patient's positioning in the prone position. In addition, it incorporates the relevant facial plug designed to conceal the hole when the characteristics of the treatment require it.
- Height adjustable by hand control.
- The backrest is adjustable in tilt by gas piston.
- Double wheels of Ø 65mm retractable by pedals.
- It has a roll holder.
- Made in Spain.
Technical specifications:
- Backrest length: 70 cm.
- Seat length: 120 cm.
- Total length: 190 cm.
- Width: 70 cm.
- Foam thickness: 5 cm.
- Foam density: 30 k/m³.
- Adjustable height: 54 to 93 cm.
- Backrest tilt angle in positive: 85º.
- Structure material: steel tube coated with epoxy powder, baked in oven at 210ºC.
- Structure color: white.
- Maximum load: 180 kg.
Upholstery features:
- Flame retardant material.
- Antimicrobial protection.
- Antibacterial protection.
- Antifungal protection.
- High resistance to abrasion.
- Resistance to sweat and human saliva.
- Resistant to urine, blood and UV light.
- Waterproof.
- Resistance to sunflower oils.
- Stain resistant surface.
- Compliant with UNE EN/71-3 standard (Toy safety).
Foam options:
If you wish, you can purchase your stretcher with another type of foam (at an additional cost).
- 3 cm 30Kg/m³+ 2cm visco
- 5 cm 150Kg/m³
- 3 cm 150Kg/m³
- 4 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 2 cm visco
- 2 cm 60Kg/m³ + 5 cm 30Kg/m³ + 4 cm visco
- 5 cm 30Kg/m³ + 4 cm visco
- 3 cm 60Kg/m³
- 2 cm 60Kg/m³ + 3 cm 30Kg/m³
- 5 cm 60Kg/m³
Upholstery cleaning instructions:
- Any stain, spill or dirt should be quickly cleaned from the upholstery to prevent permanent staining.
- Soft soap solutions or special vinyl fabric cleaners should be used to remove stains from the material surface. Consult the compatible cleaning solutions specified in the attached image.
- It is recommended to clean only with damp white cloths.
- Lacquers, strong cleaners, detergents, xylene-based liquids, acetone and MEK cause immediate damage and contribute to the deterioration of the material.
If you need more complete cleaning instructions, please contact us.
Transport:
Material delivery is at street level. It is not the obligation of the carrier to bring the merchandise inside the client's facilities.
*If you wish to purchase the stretcher with different characteristics regarding upholstery, foam, structure finish and height, please contact us.












