Refrigerator with a capacity of 125L, opaque door and 2 removable shelves

Refrigeration equipment designed for the preservation of medical samples in research centers, laboratories, hospitals, and clinics. Built with approved materials that combine epoxy painted steel with stainless steel and thermoformed ABS. Interior with curved design for better cleaning and state-of-the-art refrigeration systems. It uses eco-friendly refrigerants, so its use does not have a negative environmental impact.

The refrigerator also has low consumption compressors and fans, so it has a very low energy cost and emits less noise than other similar models on the market. It is capable of maintaining a homogeneous internal temperature that ranges between +2°C and +16°C. It has a built-in climate control that emits an alert if it detects an increase or decrease in temperature beyond the established limits. In addition, it activates acoustic and optical alerts if the probe fails and if the door is left open longer than recommended.

General features
- Opaque door
- Finished in white plastified steel
- 2 adjustable 40 mm drawers
- Uniform temperature throughout the interior
- Corner with curves for easy cleaning
- System of racks and interior guides in ASI-304 stainless steel adjustable 100 mm
- Steel sheet drawers with epoxy coating and label holders
- Double LED lighting
- Door with automatic self-closing
- Heated door perimeter frame
- Lock with key
- Easily removable rubber gasket
- Floating contact (tension-free)
- Ventilated refrigeration system (forced draft)
- Automatic defrost
- Optimized defrosts
- Digital controller with maximum precision 0.1°C
- Optical and acoustic alarms
- High and low temperature alarm
- Door open alarm with timer
- Probe failure alarm
- High condensation temperature alarm
- Set of 4 adjustable legs
- Calibration standards adhered to ISO/IEC 17025

Technical specifications
- Nominal capacity liters: 125 liters
- Adjustable temperature range: +2°C / +16°C
- Exterior dimensions: 645 x 640 x 805 mm
- CFC-free insulation thickness: 40 mm
- Zero GWP and zero ODP thermal insulation density: 40 kg/m2
- Interior bottom: AISI-304 18/8 stainless steel
- Distributed load capacity: 100 kg/m3
- Noise level: <60 db
- Components according to ATEX 014/34/EU
- Eco-friendly refrigerant gas: R290
- W/h consumption: 170
- Power supply; 230V/1/50Hz

Accessories (not included)
There are optional accessories available that are not included in the refrigerator purchase. The following accessories can be purchased at an additional cost:
- Additional display shelves.
- Product simulation probe.
- Smart supervision system - MAX LOGGER WIFI. Includes temperature deviation and voltage failure warning by email, app, IOT software, calls or SMS; data reports analysis by temperature control and humidity and real-time data verification 24/7.
- Passthrough for external probe passage.
- Internal electric socket for equipment connection.
- Exterior finish in stainless steel.
- Remote alarm contact.
- Voltage failure alarm and lithium battery +12 hours (only for temperature monitoring)
- HACCP functions, record of the last 3 alarms.
- Anti-freeze thermostat.